10 Year Structural Guarantee
For lacquer based finished tables: 2 pack Polyurethane and 2 pack acrylic finish.
Wipe after use with a damp rag in the direction of the grain to remove finger prints etc.
Best to use a clean dish cloth with warm water and a spot of detergent. Squeeze as much water as possible from the cloth before wiping.
Dry with a soft cloth again in the direction of the timber grain.
Do not use waxes or oils with lacquer finishes.
For Hard wax oil finishes:
Same as for lacquer finishes.
Use Osmo hard wax oil cleaner for spot fixing light scratches and marks. Follow directions.
Mosman dining table has a 64mm timber top with an aluminium strip inserted into the edge of the table top and 70mm thick slab end legs. Tables are designed for ease of delivery, so the legs are bolted to the top on delivery. All tables have two leg positions which can be changed by store or customer. This will enable the client to sit chairs at the end of the table or additional in the centre. Overhang at the end 380 mm or 560 mm. Fixed dining tables in various sizes are available in this range.
We chose to handcraft this timber dining table in Tasmanian Messmate. You may prefer to have yours made in either Tasmanian Messmate, Mahogany, Jarrah, Feature Eucalypt, American Oak, Blackwood, Cherry or Walnut. A wide range of upholstery fabrics, leathers and timber stains is available or you may choose to supply a sample for colour matching.
Timber displayed on the picture: Tasmanian Messmate.
Standard and custom sizes available.
Priced from $5,690 – T305: 2400 L x 1070 W x 760 H (mm) Tasmanian Messmate.
Did you know? We test all our tables throughout the design and development of new products. We prototype table frames to make sure they can carry our 10-year warranty.
Length | 2700 mm |
Width | 1070 mm |
Height | 760 mm |
Length | 2400 mm |
Width | 1070 mm |
Height | 760 mm |
Length | 3000 mm |
Width | 1200 mm |
Height | 760 mm |